Wind_Energy_M2M_Janus

T2 TerminusT2 Terminus Janus

Our second generation Standard Terminus (T2) products are highly adaptable, cost-effective cellular terminals incorporating an embedded 32-bit Cortex M3™ 150MIPS processor with 256KB Flash/96KB+4KB RAM. The T2 offers standard serial and USB (OTG) connectivity, 4-20 mA current loops, an accelerometer, and an input power range of 7 -28 VDC. The T2’s ability to configure 9 GPIO as CMOS I/O allows for a straight-forward creation of effective embedded applications. Additionally, Native USB OTG support in the Cortex processor allows for development of USB connectivity in applications.

The Terminus T2 series of products expand the reach of M2M connectivity by minimizing investment and reducing total system costs, offering customers a quick and easy integration path to wireless networks. External antenna connections enable the system integrator to meet application specific requirements. Also, the ease of application development and optional
GPS integration opens the door for further system cost reduction. All of these combined features make the T2 an excellent solution for any application requiring an enclosed communication modem.

Designed specifically for M2M type applications, the T2 products are ideal for use in all telemetry and Telematic applications including fleet and asset management, vending, security, alarm monitoring, and e-maintenance.

The T2 will be available in GSM/GPRS, CDMA - 1xRTT, EDGE, UMTS, HSPA+, EV-DO, and Wi-fi (802.11 b/g/n) wireless networks.

Features

Environmental:

-Operating Temperature: -30°C to +80°C

Physical Interfaces:

* Connectors
- RS-232 9-pin Sub D
- DC Power 2.1mm barrel jack
- GSM Antenna Jack (SMA)
- GPS Antenna Jack (MCX)
* SIM Card
- 1.8V/3.0V
- Externally accessible

Enclosure:

- Rugged ABS Plastic
- Size: 2.6” x 3.75” x 1.2” (66mm x 95.25mm x 30.84mm)
- Thru-case mountable with 2-#6 screws

AT Command Set:

- Hayes standard AT command set
- Telit proprietary commands

Performance:

Operating Voltage: - 7 to 28 VDC
Data Interfaces: Direct access/ TCP/ UDP/ SLIP/ PPP (using direct access)/ AT commands

Approvals – Certifications:

- FCC
- CE
- Carrier

Documentation

Downloads

*Coming Soon

Technical Support

New Janus Forum!

View FAQ's or ask questions over the T2 on our Janus Forum - Click here

Not sure which Terminus is right for your application? Check out the Terminus product comparison. View Terminus Comparison

Technical Support