Truck_Tracking_Janus_M2M

LTE910CF CAT 3 Embedded 4G
v1.00 and v3.00 Cellular Socket Modem

The AT&T LTE910CF v1.00 Common Footprint (CF) Socket Modem is an LTE Category 3 PTCRB and Carrier certified 4G cellular modem. They utilize the Telit LE910-NAG module as their cellular engine. The LTE910CF v1.00 units operate in LTE bands (B17), (B5), and (B2), with fallback to GSM, GPRS, EDGE, UMTS, or HSPA+ networks as needed. End device certification allows users to implement the LTE910CF in their devices with no further North American carrier certification requirements.

The Verizon LTE910CF v3.00 Common Footprint (CF) Socket Modem is an LTE Category 3 Carrier end device certified 4G cellular modem. They utilize the Telit LE910-SVG module as their cellular engine. The LTE910CF v3.00 units operate in LTE bands (B13) and (B4). End device certification allows users to implement the LTE910CF in their devices with no further North American carrier certification requirements. End device certification allows users to implement the LTE910CF in their devices with no further North American carrier certification requirements.
Verizon Mandatory FOTA Requirements App Note

LTE910CF modems are pin compatible with the full line of Janus CF Plug-In Products.

http://www.telit.com/cellular/4g-modules/xe910-family/

LTE910CF Features

  • Common Footprint (CF) Design
  • PCB Mount
  • Size: 2.5" x 1.4" x 0.325"
  • Temp Range: -40°C to 85°C
  • Input Voltage: 4.75 to 5.25Vdc (5Vdc nominal)
  • UART & USB Ports
  • Seven GPIO's
  • Data Rate:
    *LTE: 100.0D/50.0U Mbps
    *HSPA+: 42.0D/5.76U Mbps
    *UMTS: 384.0D/384.0U Kbps
  • 2G Bands: GSM 850, PCS1900
    3G Bands: B5 (850), B2 (1900)
  • LTE Bands: B17 (700), B5 (850), B4 (1700), B2 (1900)
  • TCP/IP stack access via AT commands
  • Cellular, Rx Diversity & MIMO DL 2x2, and GPS/GLONASS available via Murata GSC miniature RF connector
  • GPS
    • Stand alone GPS available at AT command interface
    • NMEA data
    • Dedicated GPS antenna connection with active antenna support

Telit Documentation

For current Telit USB drivers and information, visit:

Telit USB Drivers and Information

Tech Support

Not sure which CF product is right for your application? Check out the CF product comparison. View CF Plug-In Comparison

For the most recent Drivers please email Janus: Support

Technical Support