LTE910CFX v1.00 CAT-1 Embedded 4G
Cellular Modem
The Janus line of Common Footprint (CF) Embedded Modems are footprint compatible, embedded cellular devices for use in LTE communication networks globally. They were specifically designed to provide customers with cost effective modules that are easily integrated into new and existing designs, require limited customer certification resources, and are completely interchangeable to allow for maximum network flexibility while removing the worry of product obsolescence.
The LTE910CFX v1.00 CAT-1 Common Footprint (CF) Modem is an LTE Category 1 cellular modem with support for worldwide cellular networks.
Utilizing the Telit LE910C1-WWXD module as its cellular engine, the LTE910CFX v1.00 operates in most 4G LTE bands globally and support fallback to 3G (HSPA+) and 2G network technologies.
North American “end device” certification allows users to implement the LTE910CFX in their devices with no further carrier certification requirements.* (See bands under Features below)
Verizon Mandatory FOTA Requirements App Note
LTE910CF modems are pin compatible with the full line of Janus CF Modem Products.
http://www.telit.com/cellular/4g-modules/xe910-family/
Documentation
Technical Documents
Application Notes
LTE910CFX CAT1 Features
- Approvals
FCC Approval: RI7LE910C1-WWXD
Carrier Approvals:
• PTCRB
• AT&T
• Verizon
• RED - Europe (Pending)
- Data Rate: LTE: 10D/5U Mbps
- Multi-Band Support
• 4G: B1, B2, B3, B4, B5, B7, B8, B9, B12, B13, B14, B18, B19, B20, B25, B26, B28
• 3G (HSPA+): B1, B2, B4, B5, B6, B8, and B19
• 2G: B2, B3, B5, and B8
- TCP/IP stack access via AT commands
- SMS (MO / MT)
- Output power: Class 3 (0.2W, 23 dBm) @ LTE
- Dimensions: 2.5” x 1.4” x 0.325”
- Operational temperature range: -40°C to 85°C
- Internal Switching Regulator:
• Input Voltage Range: 4.75 to 5.25Vdc (5Vdc nominal)
• Supply disable via terminal input pin
- Variable logic level (UART/GPIO)
• Adjustable from 1.8 - 5.0Vdc
• Defaults to 2.85v
- SIM Card
• Dual locking SIM card sockets, micro (3FF size) SIM
- Antenna:
• Cellular and GNSS antenna ports
• U.FL miniature RF connectors
- GNSS
• Stand alone GPS, GLONASS, Beidou, Galileo, and
QZSS available
at AT command interface
• A-GPS support
• NMEA data
• GNSS antenna connection w/active antenna support
- Telit OneEdge™ Technology
Telit Documentation
For current Telit modules and information, visit:
Telit Module Information
Tech Support
Not sure which CF product is right for your application? Check out the CF product comparison. View CF Plug-In Comparison
Technical Support
|
|
