Truck_Tracking_Janus_M2M

LTE910CF v20.00 CAT-M1/NB2 Embedded 4G Cellular Socket ModemLTE910CF-v20

The Janus line of Common Footprint (CF) Socket Modems are footprint compatible, embedded cellular devices for use in LTE communication networks. They were specifically designed to provide customers with cost effective modules that are easily integrated into new and existing designs.

The LTE910CF v20.00 CAT-M1/NB2 Socket Modem uses the Telit ME910G1-WW as its cellular engine and has global PTCRB, AT&T, Verizon and RED certifications. The LTE910CF v20.00 units operate in CAT-M1/NB2 LTE 4G and 2G bands. (See bands under Features below)

Verizon Mandatory FOTA Requirements App Note

LTE910CF modems are pin compatible with the full line of Janus CF Socket Modem Products.

http://www.telit.com/cellular/4g-modules/xe910-family/

LTE910CF CAT-M1 Features

  • Approvals (pending)
    • Regulatory: FCC, GCF, PTCRB
    • Carrier: PTCRB, AT&T, Verizon and RED certifications;
  • Data Rate:
    LTE Cat M1 (Rel. 14)
    • Uplink up to 1 Mbps
    • Downlink up to 588 Kbps
    LTE Cat NB2 (Rel. 14)
    • Uplink up to 160 Kbps
    • Downlink up to 120 Kbps
    EGPRS (2G Fallback variants)
    • Uplink up to 210 Kbps
    • Downlink up to 264 Kbps
  • V20.00 Frequency bands
    • LTE 4G Bands: B1 B2 B3 B4 B5 B8 B12 B13 B18 B19 B20 B25 B26 B27 B28 B66 B7
    • LTE 2G Bands: B2 B3 B5 B8
  • TCP/IP stack access via AT commands
  • SMS (MO / MT)
  • Output power: Class 3 (0.2W, 23 dBm) @ LTE
  • Dimensions: 2.5” x 1.4” x 0.325”
  • Operational temperature range: -40°C to 85°C
  • Internal Switching Regulator:
    • Input Voltage Range: 4.75 to 5.25Vdc (5Vdc nominal)
    • Supply disable via terminal input pin
  • Variable logic level (UART/GPIO)
    • Adjustable from 1.8 - 5.0Vdc
    • Defaults to 2.85v
  • SIM Card
    • Locking SIM card socket, Mini (2FF size) SIM
  • Antenna:
    • Cellular and GNSS antennas
    • U.FL miniature RF connectors
  • GNSS
    • Stand alone GPS and GLONASS available at AT command interface
    • A-GPS support
    • NMEA data
    • GNSS antenna connection w/active antenna support
  • Telit OneEdge™ Technology

Telit Documentation

For current Telit USB drivers and information, visit:

Telit USB Drivers and Information

Tech Support

New Janus Forum!

View FAQ's or ask questions over the LTE910CF CAT1 on our Janus Forum - Click here

Not sure which CF product is right for your application? Check out the CF product comparison. View CF Plug-In Comparison

For the most recent Drivers please email Janus: Support

Technical Support