LTE CAT-M1 Banner

LTE CAT-M1 v10.00 & v11.00LTE910XF
Embedded Cellular Modem

The LTE910XF CAT-M1 Socket Modems are available in two versions: LTE910XF v10.00 for AT&T and LTE910XF v11.00 for Verizon. Both versions use the Telit ME910C1 as their cellular engine. The LTE910XF v10.00 units operate in LTE CAT M1 LTE bands B2, B4 and B12. The LTE910XF v11.00 units operate in LTE CAT-M1 bands B4 and B13.

Available in two different versions for North America:
LTE910XF v10.00 TBUVN (AT&T)
LTE910XF v11.00 TAUVN (Verizon - certification pending)

Verizon Mandatory FOTA Requirements App Note

The full XF line shares the Industry Standard 20-pin connector footprint and is flexible in implementation - both into new product designs and with existing products.

http://www.telit.com/cellular/4g-modules/xe910-family/

LTE910XF v10.00 & v11.00 CAT-M1 Features

  • Industry Standard 20-pin Connectors
  • PCB Mount
  • Size: 1.14" x 1.3" x 0.256"
  • Temp Range: -40°C to 85°C
  • Input Voltage: 3.5 to 5.5Vdc
  • Data Rate: LTE: 300 Kbps Down / 375 Kbps Up
  • Frequency bands
    • v10.00 (AT&T) LTE Bands: B2, B4, B12
    • v11.00 (Verizon) LTE Bands: B4, B13
  • TCP/IP stack access via AT commands
  • SMS (MO / MT)
  • Output power: Class 3
    • (0.2W, 23 dBm) @ LTE
    • (0.25W, 24 dBm) @ WCDMA
  • Internal Switching Regulator:
    • Input Voltage Range: 4.75 to 5.25Vdc (5Vdc nominal)
    • Supply disable via terminal input pin
  • Variable logic level (UART/GPIO)
    • Adjustable from 1.8 - 5.0Vdc
    • Defaults to 2.85v
  • SIM Card
    • 3FF micro
  • Cellular, Rx Diversity & MIMO DL 2x2 available via miniature RF connector

Telit Documentation

For current Telit modules and information, visit:

Telit Module Information

Tech Support

 

Not sure which CF product is right for your application? Check out the CF product comparison.View XF Plug-In Comparison

Technical Support


 

Tech Support

New Janus Forum!

View FAQ's or ask questions over the HSPA910XF on our Janus Forum - Click here

Technical Support