LTE910CF CAT 1 Embedded 4G - v18.00 Dual SIM Cellular Socket Modem
The AT&T LTE910CF v18.00 Common Footprint (CF) Socket Modem is an LTE Category 1 PTCRB and Carrier certified 4G cellular modem with support for two SIM cards. It utilizes the Telit LE910-NA1 SSKU module as its cellular engine.
Multiple carriers are supported using two firmware loads selected via AT commands. The modem accomodates two SIM cards, selectable via AT commands. This allows selecting the most suitable carrier after products are deployed in the field.
The AT&T centric firmware supports operation in LTE bands B13, B12, B5, B4 and B2, with fallback to 3G HSPA+ networks as needed. End device certification allows users to implement the LTE910CF in their devices with no further North American carrier certification requirements.
The Verizon firmware supports operation in LTE bands B13, B4, and B2. End device certification allows users to implement the LTE910CF in their devices with no further North American carrier certification requirements.
LTE910CF modems are pin compatible with the full line of Janus CF Plug-In Products.
http://www.telit.com/cellular/4g-modules/xe910-family/
Documentation
Technical Documents
Application Notes
LTE910CF CAT1 v18.00 Dual SIM Features
- Common Footprint (CF) Design
- PCB Mount
- Dimensions: 2.5" x 1.4" x 0.325"
- Data Rate: LTE: 10D/5U Mbps
- Frequency bands (Verizon)
• LTE Bands: B2(1900), B4(AWS1700), B13(700)
- Frequency bands (AT&T)
• LTE Bands: B12/B13(700), B5(850), B4(AWS1700), B2(1900)
• 3G Bands: B5(850), B2(1900)
- TCP/IP stack access via AT commands
- SMS (MO / MT)
- Output power: Class 3
• (0.2W, 23 dBm) @ LTE
• (0.25W, 24 dBm) @ WCDMA
- Operational temperature range: -40°C to 85°C
- Internal Switching Regulator:
• Input Voltage Range: 4.75 to 5.25Vdc (5Vdc nominal)
• Supply disable via terminal input pin
- Variable logic level (UART/GPIO)
• Adjustable from 1.8 - 5.0Vdc
• Defaults to 2.85v
- SIM Card
• Two 3FF micro locking card cages
• SIM selectable via AT commands
- Cellular, Rx Diversity & MIMO DL 2x2 available via miniature RF connector
Telit Documentation
For current Telit modules and information, visit:
Telit Module Information
Tech Support
Not sure which CF product is right for your application? Check out the CF product comparison. View CF Plug-In Comparison
Technical Support
|
|
